Installation & Cleaning Products
Tile & Grout Cleaners – Various Strengths
UltraCare Abrasive Surface Cleaner
UltraCare Abrasive Surface Cleaner is a powerful, abrasive cleaner that is safe for use on a variety of ceramic, porcelain and natural-stone surfaces. This water-based, biodegradable formula is nontoxic and non-flammable, containing no VOCs or acids. Cleaning does not require letting the product stand on the surface. UltraCare Abrasive Surface Cleaner penetrates deep into dense surface pores and easily removes ground-in dirt, grime, rust stains and mineral deposits. This product is formulated to remove most factory-applied waxes and floor finishes as well as light cementitious and epoxy grout residue. It is excellent for use on heavily textured and hard-to-clean surfaces.
UltraCare Acidic Tile & Grout Cleaner
UltraCare Acidic Tile & Grout Cleaner is a highly concentrated acidic cleaner formulated to remove cement grout haze, mortar residue, mineral deposits, rust stains and efflorescence from tile, concrete and masonry surfaces. It is also effective for removing hard-water stains, lime deposits and soap scum. This product contains no phosphates.
UltraCare Concentrated Tile & Grout Cleaner
UltraCare Concentrated Tile & Grout Cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral cleaner helps to maintain a variety of ceramic, porcelain and natural-stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum buildup and hard-water deposits.
UltraCare Heavy-Duty Stone, Tile & Grout Cleaner
UltraCare Heavy-Duty Stone, Tile & Grout Cleaner is a highly concentrated and high-alkaline cleaner and degreaser. This product is formulated to quickly remove most waxes, grease, oil, light soap scum, and stains from mildew and algae. It is quite effective at removing most factory-applied waxes and floor finishes, and is ideal for areas that have been neglected or subject to heavy use.
UltraCare Grout Refresh Pre-Cleaner
UltraCare Grout Refresh Pre-Cleaner is a ready-to-use cleaner specially formulated to prepare grout joints before application of MAPEI’s Grout Refresh. UltraCare Grout Refresh Pre-Cleaner will remove grease, dirt, soil, soap scum and hard-water deposits from grout joints to ensure a superior bond for Grout Refresh. This product should not be used on epoxy grout joints.
Ultracare Penetrating Plus SB Stone & Porcelain Tile Sealer is a premium, natural-look, solvent-based penetrating sealer that uses VOC-exempt materials and will provide maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed porcelain and ceramic tiles, masonry, quarry tiles and cementitious grout. The product can also be used as a pre-grouting sealer.
UltraCare Penetrating Plus Stone, Tile & Grout Sealer is a premium, natural-look, water-based penetrating sealer that provides maximum protection against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine, etc.), unglazed ceramic tile, masonry and grout. The product can also be used as a pre-grouting sealer.
UltraCare Everyday Stone & Grout Cleaner & Resealer is a ready-to-use, everyday spray cleaner. This product helps to boost the performance of any existing penetrating sealers while cleaning and deodorizing. Powerful enough to help dissolve grease and grime, UltraCare Everyday Stone & Grout Cleaner & Resealer is ideal for kitchen and bathroom countertops. Non-acidic, it is safe to use on natural stone, grout and tile.
UltraCare Cement Grout Haze Remover is a professional-strength formulation that helps to remove cement grout haze from tile, concrete and stone surfaces. It is an acidic, low-odor, non-flammable, easy-to-use, water-based formula.
UltraCare Epoxy Grout Haze Remover is a professional-strength formulation that helps to remove epoxy grout haze from tile, concrete and stone surfaces. It is a low-odor, non-flammable, easy-to-use, water-based formula.
NanoScrub® Tile Cleaner is an abrasive cream cleaner designed to work where other cleaners won’t. It utilizes Nano-sized particles to penetrate into small surface pores where it can effectively work to remove surface stains and residues. An effective Tile Cleaner for all stone and tile surfaces. Also removes factory applied waxes and floor finishes, coating sealers, light grout residue (including epoxy), rubber and pencil marks, light mineral deposits, ground ¬in dirt and most sealer residues. Ideal for cleaning porcelain tiles.
- Dissolves ground in dirt from textured surfaces
- Removes factory applied waxes and floor finishes
- NanoScrub® is non-toxic, non-flammable and non-acidic
- Breakthrough NanoSTG™ technology
For use on:
As a cleaner for porcelain tiles, ceramic, polished and unpolished natural stone (such as granite, limestone, marble, slate, and travertine), grout, quarry, saltillo, terra-cotta, cement pavers, masonry surfaces, and other stone, tile and grout surfaces.
Stone Enhancer is an economical, no-sheen, enhanced-look, penetrating sealer formulated to darken and highlight the character and beauty of unsealed natural stone. It rejuvenates the color and improves the appearance of worn and weathered stone. May also be used as a pre-grouting sealer. Allows moisture-vapor transmission. It also effectively seals and darkens the color of grout joints.
Key Features of Stone Enhancer:
- Darkens and highlights natural stone
- Excellent stain protection
- No-sheen, enhanced look
- Does not alter the slip resistance of sealed surface
- Solvent-based formula
- Lasts up to 3 years
Stone Deep Clean is a powerful heavy duty cleaner and degreaser formulated to clean stone surfaces that have been neglected or subjected to heavy use. Ideal for neglected porous surfaces such as sandstone, concrete & pavers
- For heavily soiled natural stone surfaces
- Cleans ground-in dirt, grease, soap scum, and other organic materials
- Safe, Non-acidic formula
- Biodegradable formula
- Specially designed to be safe for use on natural stone
- Strips wax and floor finishes
For use on:
Natural stone (such as granite, limestone, slate and travertine), ceramic, porcelain, quarry, Saltillo, terra-cotta, cement pavers, masonry surfaces, linoleum or resilient flooring.